How To Use Vigoro Spreader?
If you are anything like me, you get easily excited when a new garden tool comes out. The Vigoro spreader is one such gardening tool that has taken the world by storm in recent years. However, due to the advanced mechanics, a lot of people don’t understand how to use Vigoro spreaders on their lawns.
Before you use the spreader, you must cut the lawn grass to a certain length. Once the lawn is ready, simply pour the seeds inside the spreader and set the flow rate according to your preference. You can easily set the flow rate with the click of a button.
Keep in mind that you must calibrate the Vigoro spreader before you put it into action. If you don’t know how to do that either, then this article is a saving grace for you.
Importance Of A Vigoro Spreader
Before you start learning how to use a Vigoro spreader, you first need to understand what they are used for. If you are reading this article, then chances are you own a beautiful lawn and will go to any lengths to retain the lawn’s beauty.
The Vigoro spreader is one of the many tools that can help you do so. Its main function is to distribute large amounts of seeds and fertilizers all over your lawn.
You can even spread herbicides and pesticides with this efficient device. It’s a brilliant invention that reduces the time and effort of maintaining your yard. Hence, you must have one if you have a large lawn.
How To Calibrate A Vigoro Spreader?
The Vigoro spreader comes with multiple settings for spreading seeds and fertilizers in a designated area. These settings will differ based on the amount of land you’re working with. So, it’s crucial to know the best way to calibrate your Vigoro spreader according to your needs.
Calculate The Amount Of Fertilizer Or Seeds
The first thing you need to do after buying a bag of fertilizer or seeds for your Vigoro spreader is to determine the weight. You can figure out how much product the package comes with if you check in the back. Note that number down and measure the dimensions of your lawn.
You need to divide the lawn’s square foot area by 100 and multiply it with the amount of product you have at your disposal. This will give you an accurate assumption of how much product the spreader can deliver on every square feet.
Proper Placement is Necessary
It’s very important to realize where to place the Vigoro spreader. Most people make the slight mistake of placing the Vigoro spreader directly on top of the lawn. They run the risk of overspreading on the lawn, which can lead to severe damage.
Thus, it’s recommended to place the trusty spreader along the driveway when filling it up. Make sure the driveway is clear of any dust or debris. Position the Vigoro spreader on the driveway and pour the product into it. The flow lever must remain switched off during this step.
Initiate the Spreading Procedure
Once you have setup the Vigoro spreader, and filled it up with the product, it’s time to start spreading. Make sure the spreader is in the correct position before you turn on the flow lever. Guide the Vigoro spreader in your desired direction in a slow and steady pace.
Turn off the flow lever after taking 4 steps in a specific direction. This step is necessary to determine the spreader’s dispersal pattern. Measure the amount of area that the spreader covered, and note it down. Now, you can continue spreading the product on your entire lawn.
Check for any Remaining Product
Considering that you poured the products according to your calculation, there shouldn’t be any product left by the time you finish. However, you should check for any remains in the hopper. Once the product is distributed, you can clean up the driveway with a broom.
Take Notes of Calibration Settings
All this effort will be of no use if you don’t write down the calibration measurements. This will allow you to set the accurate measurements the next time without any test runs.
Remember that, you might need to adjust the flow rate based on how much product is left in the hopper by the end. If the hopper is empty before the work is done, you must reduce the flow rate accordingly.
Steps of Using the Vigoro Spreader
Now that you have successfully calibrated the Vigoro spreader, it’s time to get down to business. Just follow these easy steps, and you will be done in no time.
Step 1
Prepare the area you wish to work on by sweeping off the debris and mowing the lawn to a smaller length. If you have already run the calibration, then you know how much area you need to work with. In case you’re still not sure, measure the entire area you want to fertilize.
Step 2
You need to set the flow rate according to the spreading area you have in mind. Use the calculation I mentioned above. Don’t forget to consider the dispersal pattern as well.
Step 3
The next step is to pour the measured amount of product inside the hopper. Make sure the hopper is clean before you do so. Determine the amount according to your calculations.
Step 4
Turn the flow lever on once all the settings are accurate. Start walking across the yard and the spreader will do its job. The Vigoro spreader will let you know when it’s empty. Pour more fertilizer into it if you need to. If your calculations are correct, then you won’t need to fill it up the second time.
Step 5
When you are done with the distribution process, turn the machine off. You must clean any remaining product inside the hopper before you store it. Collect any fertilizer or seed that you spilled on the driveway. Keep the waste to a minimum.
Final Words
Considering you read the entire article, you now have all the necessary information to figure out how to use Vigoro spreading. Make sure you follow the instruction manual provided with the equipment if it’s the first time. I have covered every other aspect in this article to make it as easy to understand as possible.
